Mountz STC40 Transformer



  • The STC40 is a power supply that operates with select Mountz electric screwdrivers.
  • It is single tool controller that is designed to operate at either 110v and 230v.
  • The unit can connect with the Scout Screw Counting system.
  • This product is CE marked and can be used in the European Union. 

More details

Shipping Fees and Delivery Information
Free UK Delivery on orders over £50.00 including VAT

Estimate Shipping fees


More info


  • Selectable output voltage
  • Over Heat Protection (OHP) and Over Current Protection (OCP) protect driver from damage or malfunction.
  • Temperature Detection powers down the unit and resets automatically when unit restores to acceptable levels.
  • Switchable 110V & 230V input voltage. The unit will reset itself if motor/current overload is too high
  • Start & Stop Signal Output (for PLC).
  • Screwdriver Lock Signal Input (for PLC).
  • Unit can be connected to the Scout Screw Counter.

This transformer works with the following Mountz models - 

  • LF-Series
  • BF-Series
  • NF-Series

Technical details

Tool Weight: 1.8 lbs.
Tool Length: 7.5 inches
Tool Width: 4.375 inches
Tool Height: 2.375 inches
Maximum Output: 10A
Output VDC: 30/40V
Input VAC: 110/230V

Related Products


Ask a question

If your question has not yet been answered below, use the form below to ask something about this product.

Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead

(Will be shown along side your question when it is answered. Optional, if you prefer to remain anonymous please leave blank.)
*(Required to be notified when an answer is available)