The MTX20z is a low torque sensor designed for calibrating and testing small hand screwdrivers, torque wrenches and power tools.
With its low profile design, this calibration instrument can be used for automated applications, by mounting it to a palletised system, which saves time as there is no need to remove the driver from the robot or off the automated system for calibration. This versatile torque sensor is used in conjunction with a torque tester.
This accuracy of this torque sensor is ± .25% of full scale
WARNING! Always use a run down adapter when testing power tools.
|Drive Size:||1/4" F/Sq|
|American:||2 - 20 ozf.in|
|S.I.:||1.5 - 14 cN.m|
|Metric:||0.1 - 1.4 kgf.cm|
|Tool Length (Imperial):||2.55 Inches|
|Tool Length (Metric):||64.77 mm|
|Tool Width (Imperial):||1.6 Inches|
|Tool Width (Metric):||40.64 mm|
|Tool Height (Imperial):||1 Inches|
|Tool Height (Metric):||25.40 mm|
|Cal Cert Options Data Set:||Supplied with a Free ISO 17025 Certification of Calibration|
|Product||Drive Size||American||S.I.||Metric||Tool Length (Imperial)||Tool Length (Metric)||Tool Width (Imperial)||Tool Width (Metric)||Tool Height (Imperial)||Tool Height (Metric)|
|079007||1/4" F/Sq||1 - 10 ozf.in||0.7 - 7.1 cN.m||0.07 - 0.7 kgf.cm||2.55 Inches||64.77 mm||1.6 Inches||40.64 mm||1 Inches||25.40 mm|
|079008||1/4" F/Sq||2 - 20 ozf.in||1.5 - 14 cN.m||0.1 - 1.4 kgf.cm||2.55 Inches||64.77 mm||1.6 Inches||40.64 mm||1 Inches||25.40 mm|
|079009||1/4" F/Sq||4 - 40 ozf.in||2.9 - 28.2 cN.m||0.3 - 2.9 kgf.cm||2.55 Inches||64.77 mm||1.6 Inches||40.64 mm||1 Inches||25.40 mm|
|079010||1/4" F/Sq||8 - 80 ozf.in||5.7 - 56.5 cN.m||0.6 - 5.8 kgf.cm||2.55 Inches||64.77 mm||1.6 Inches||40.64 mm||1 Inches||25.40 mm|
|079011||1/4" F/Sq||16 - 160 ozf.in||11.3 - 113 cN.m||1.2 - 11.5 kgf.cm||2.55 Inches||64.77 mm||1.6 Inches||40.64 mm||1 Inches||25.40 mm|
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead