Mountz 068404 LTT250i Torque Analyser 282.5cNm - 2825cNm

This 282.5cNm - 2825cNm torque analyser is designed for calibrating tools, joint testing, auditing and measuring torque.

Torque tools go out of calibration with use and to maintain consistent accuracy, torque tools must be checked periodically for wear or defective parts.

The LTT-Series is an advanced torque testing and documentation tool. Using a quality torque tester makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. 

This torque analyser has an accuracy ± 0.5% of reading from 20% to 100% of full scale, and an accuracy ± 1% of reading from 10% to 20% of full scale.

Features

• Recommended for all hand screwdrivers, wrenches or power tools.
• Provides EZ-Plug & Play with Mountz torque sensors. This torque analyser features ARCII technology, an instant auto-recognition system of the sensor connected to the LTT.
• Features a built-in transducer and can connect to an external torque sensor.
• Selection of six operation modes: (Track, Peak, First Peak, Audit, Spindle Audit and Torque + Angle).
• Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm) and two units of force measurements: (lbf and kN).
• Features built-in tool tests operation.
• This torque analyser has the ability to store a total of 5000 data points.
• Real time clock for time stamping of readings and includes a USB interface to download readings to a PC.
• Displays real time graph of torque vs. time using.
• Features Go / No-Go LEDs that illuminate when high or low setting is achieved.
• Has an easy-to-use menu structure, a six-digit display and connects to an external torque sensor.
• The high capacity Li-Ion batteries ensure long life.
• Can connect to most mv/v torque sensors and can store calibration data for up to 50 non-smart torque & force sensors.
• The 5VDC capability allows the unit to be used with a Brushless Rotary torque sensor for testing pulse tools and high RPM tools.
• Torque and angle data is displayed simultaneously when used with torque and angle sensors, up to 8000 RPM for angle measurement.
• Display Accuracy is better than +/- 0.0625 of reading.
• Five low-pass filter selections (3000, 2000, 1500, 500 and 200 Hz).
• "Flash" memory allows upgrades to be done by the user in the field.