The FGC-30A is a next-generation cam-over wrench made by Mountz for when under/over-torquing puts your products at risk, the FGC-30A wrench delivers the accuracy you need and safeguards against fastening failures.
This error-proofing torque wrench removes the operator's influence out of the torque equation and delivers a more accurate and repeatable fastening result than that of a standard click type wrench.
This 6Nm-30Nm FGC cam-over wrench can be given to any operator and you will have the confidence that they will deliver the correct torque, time after time. Mountz FGC tools stay in calibration twice as long as the most stringent industry standard (ISO 6789).
The preferred and certified ranges of this tool is in accordance with the requirements of ISO 6789 (+/- 4% of indicated setting).
|Product||Drive Size||American||S.I.||Accuracy||Tool Weight||Tool Length (Imperial)|
|1/4" Sq. Dr.||8.9 - 44.2 lbf.in||1 - 5 N.m||+/-6%||0.6 lbs.||7.8 Inches|
|076566||1/4" Sq. Dr.||17.7 - 88.5 lbf.in||2 - 10 N.m||+/-6%||0.7 lbs.||7.8 Inches|
|076567||3/8" Sq. Dr.||17.7 - 88.5 lbf.in||2 - 10 N.m||+/-6%||0.7 lbs.||7.8 Inches|
|076568||1/4" Sq. Dr.||4.4 - 22.1 lbf.ft||6 - 30 N.m||+/-4%||1.7 lbs.||12.8 Inches|
|076569||3/8" Sq. Dr.||4.4 - 22.1 lbf.ft||6 - 30 N.m||+/-4%||1.7 lbs.||12.8 Inches|
|076570||3/8" Sq. Dr.||11.1 - 55.3 lbf.ft||15 - 75 N.m||+/-4%||3.1 lbs.||17.5 Inches|
|076571||1/2" Sq. Dr.||18.5 - 92.2 lbf.ft||25 - 125 N.m||+/-4%||3.1 lbs.||17.5 Inches|
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead