View larger

Mountz 280064 PTL 85i-Q Preset Torque Limiter 508.5cNm - 960.5cNm

Part # : 280064

Manufacturer : Mountz

Designed to be used in-line to limit torque (508.5cNm - 960.5cNm) for hand (static) applications.
Can also be used as an overload protection device on most applications where measuring a static overload is needed.
Provides accurate process control as the unit prevents a fastener or bolt from being under and over tightened.

This torque limiter has repeatability within +/- 6% of pre-set torque value.

Designed to be used in-line to limit torque for hand (static) applications. For low torque applications.
Can also be used as an overload protection device on most applications where measuring a static overload is needed.
The rotary clutch mechanism slips free when the pre-set torque value is reached, eliminating overtightening. The mechanism then automatically resets.
Pre-set using a torque analyser.
Bi-directional operation and is calibrated in either the CW or CCW direction.
Lighweight and easy-to-use.
Non-length dependent.

WARNING! Do not use with a power tool.

Product	American	S.I.	Metric	Input Drive	Output Drive	Tool Weight	Tool Length (Imperial)	Tool Length (Metric)
280060	1 - 5 lbf.in	11.3 - 56.5 cN.m	1.2 - 5.5 kgf.cm	3/8 F/Sq	1/4 F/Hex	3.3 oz.	3 Inches	76.20 mm
280061	6 - 45 lbf.in	67.8 - 508.5 cN.m	6.9 - 51.7 kgf.cm	3/8 F/Sq	1/4 F/Hex	3.3 oz.	3 Inches	76.20 mm
280062	1 - 5 lbf.in	11.3 - 56.5 cN.m	1.2 - 5.5 kgf.cm	3/8 F/Sq	3/8 M/Sq	3.3 oz.	3 Inches	76.20 mm
280063	6 - 45 lbf.in	67.8 - 508.5 cN.m	6.9 - 51.7 kgf.cm	3/8 F/Sq	3/8 M/Sq	3.3 oz.	3 Inches	76.20 mm
280064	45 - 85 lbf.in	508.5 - 960.5 cN.m	51.7 - 97.7 kgf.cm	3/8 F/Sq	3/8 M/Sq	3.3 oz.	3 Inches	76.20 mm