Mountz 280062 PTL 5i-Q Preset Torque Limiter 11.3cNm - 56.5cNm

280062

Mountz

  • Designed to be used in-line to limit torque (11.3cNm - 56.5cNm) for hand (static) applications.
  • Can also be used as an overload protection device on most applications where measuring a static overload is needed.
  • Provides accurate process control as the unit prevents a fastener or bolt from being under and over tightened.

More details

Shipping Fees and Delivery Information
Free UK Delivery on orders over £50.00 including VAT

Estimate Shipping fees

$89.69

More info

This torque limiter has repeatability within +/- 6% of pre-set torque value.

  • Designed to be used in-line to limit torque for hand (static) applications. For low torque applications.
  • Can also be used as an overload protection device on most applications where measuring a static overload is needed.
  • The rotary clutch mechanism slips free when the pre-set torque value is reached, eliminating overtightening. The mechanism then automatically resets.
  • Pre-set using a torque analyser.
  • Bi-directional operation and is calibrated in either the CW or CCW direction.
  • Lighweight and easy-to-use.
  • Non-length dependent.

WARNING! Do not use with a power tool.

Product Specifications

American:1 - 5 lbf.in
S.I.:11.3 - 56.5 cN.m
Metric:1.2 - 5.5 kgf.cm
Input Drive:3/8 F/Sq
Output Drive:3/8 M/Sq
Tool Weight:3.3 oz.
Tool Length (Imperial):3 Inches
Tool Length (Metric):76.20 mm
ProductAmericanS.I.MetricInput DriveOutput DriveTool WeightTool Length (Imperial)Tool Length (Metric)
2800601 - 5 lbf.in11.3 - 56.5 cN.m1.2 - 5.5 kgf.cm3/8 F/Sq1/4 F/Hex3.3 oz.3 Inches76.20 mm
2800616 - 45 lbf.in67.8 - 508.5 cN.m6.9 - 51.7 kgf.cm3/8 F/Sq1/4 F/Hex3.3 oz.3 Inches76.20 mm
2800621 - 5 lbf.in11.3 - 56.5 cN.m1.2 - 5.5 kgf.cm3/8 F/Sq3/8 M/Sq3.3 oz.3 Inches76.20 mm
2800636 - 45 lbf.in67.8 - 508.5 cN.m6.9 - 51.7 kgf.cm3/8 F/Sq3/8 M/Sq3.3 oz.3 Inches76.20 mm
28006445 - 85 lbf.in508.5 - 960.5 cN.m51.7 - 97.7 kgf.cm3/8 F/Sq3/8 M/Sq3.3 oz.3 Inches76.20 mm

Related Products

Ask a question

1 Question(s) answered

  • Asked by levi watts
    on 28/10/2019  

    I'm looking at the Mountz 280062 PTL 5i-Q Preset Torque Limiter 11.3cNm - 56.5cNm. How is the torque set on it? when set will that value operate in both directions? Answer:
    This is a pre-set item so we would set the tool in house to your desired torque limit. This item can be used in both clockwise and counter clockwise directions but not at the same time, it would have to be sent to us to be changed.

If your question has not yet been answered below, use the form below to ask something about this product.

Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead

(Will be shown along side your question when it is answered. Optional, if you prefer to remain anonymous please leave blank.)
*(Required to be notified when an answer is available)