A spanner that has offset heads means that getting a firm grip of a nut or bolt is much easier. And a better purchase means that the likelihood of damaging the nut or bolt is reduced too. When you need a shallow offset, then this 6mm & 7mm double ended 10° offset ring spanner is the ideal tool to get the job done.
As you would expect from leading manufacturer Stahlwille, everything about this ring spanner oozes quality. From the traditional design to the box-ends, to the chrome alloy steel used to forge it. This is a tool that will give years of service.
Suitable for use by the competent DIYer and in an industrial or workshop setting, the chrome plated finish protects it against grime and grease, as well as being a comfortable fit in your hand. Available in a range of sizes, start your collection with the 6mm & 7mm double ended 10° offset ring spanner.
|41070607||6mm x 7mm||170mm||41g||9.5mm||10.8mm||6mm||7mm||7mm||8mm|
|41070809||8mm x 9mm||179mm||49g||12.1mm||13.3mm||7mm||8mm||8mm||9mm|
|41071011||10mm x 11mm||188mm||66g||14.6mm||15.9mm||8.5mm||9.5mm||9mm||10mm|
|41071213||12mm x 13mm||203mm||78g||17.3mm||18.6mm||9.5mm||10.5mm||10mm||11mm|
|41071415||14mm x 15mm||219mm||109g||20.1mm||21.4mm||10.5mm||11.5mm||11mm||13mm|
|41071617||16mm x 17mm||248mm||144g||22.7mm||24.1mm||11.5mm||12.5mm||14mm||15mm|
|41071719||17mm x 19mm||250mm||162g||24.1mm||27mm||12.5mm||13.5mm||15mm||18mm|
|41071819||18mm x 19mm||251mm||157g||25.5mm||27mm||12.5mm||13.5mm||16mm||18mm|
|41072022||20mm x 22mm||280mm||223g||28.5mm||31.3mm||13.5mm||14.5mm||19mm||20mm|
|41072123||21mm x 23mm||328mm||281g||29.8mm||32.9mm||13.5mm||14.5mm||19mm||22mm|
|41072427||24mm x 27mm||376mm||426g||34.3mm||38.6mm||14.5mm||16mm||22mm||24mm|
|41073032||30mm x 32mm||429mm||608g||42.6mm||45.2mm||18mm||18mm||26mm||27mm|
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead