Greenlee 50366904 PG 9 - 21 Slug Buster® Punch Set with Ratchet - 10 Pieces
50366904
- Punch set between PG 9 - PG 21 designed for punching ST37 low carbon steel
- Split slugs fall free when punch is complete, for easy disposal
- Includes ratchet and accessories
More info
Features
- Slug Buster hole punch set between PG 9 - PG 21 (15.2mm - 28.3mm), which can cut through sheet steel (ST37 low carbon steel), plastic and aluminium up to 3mm thickness.
- Includes ratchet for use with hole punches, as well as accessories.
Pre-drilling
- Where the draw stud is 9.5mm diameter, a pilot hole of 9.7mm must be drilled.
- Where the draw stud is 19mm diameter, a pilot hole of 20.5mm must be drilled.
Set Includes
| Product | Product type | PG size | Metric size | Maximum material thickness |
|---|---|---|---|---|
| 50319892 | Hole Punch | PG 9 | 15.2mm | 2mm |
| 50319906 | Hole Punch | PG 11 | 18.6mm | 2mm |
| 50319914 | Hole Punch | PG 13 | 20.4mm | 2mm |
| 50319620 | Hole Punch | PG 16 | 22.5mm | 2mm |
| 50319639 | Hole Punch | PG 21 | 28.3mm | 3mm |
| 50319930 | Hole Punch | PG 21 | 28.3mm | 2mm |
| 50000420 | Draw Stud | - | 9.5mm | - |
| 50040421 | Draw Stud | 19mm | ||
| 50349414 | Ratchet | - | - | - |
| 50360183 | Step Bit | - | 9.7mm | - |
Related Products
Accessories
Related categories
Recently Viewed products
Ask a question
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead