Greenlee 50366939 ISO 16 - 63 Slug Buster® Punch Set with Ratchet - 11 Pieces
50366939
- Punch set between ISO 16 - ISO 63 designed for punching ST37 low carbon steel
- Split slugs fall free when punch is complete, for easy disposal
- Includes ratchet and accessories
More info
Features
- Slug Buster hole punch set between ISO 16 - ISO 63 (16.2mm - 64mm), which can cut through sheet steel (ST37 low carbon steel), plastic and aluminium up to 3.5mm thickness.
- Includes ratchet for use with hole punches, as well as accessories.
Pre-drilling
- Where the draw stud is 9.5mm diameter, a pilot hole of 9.7mm must be drilled.
- Where the draw stud is 19mm diameter, a pilot hole of 20.5mm must be drilled.
Set Includes
| Product | Product type | ISO size | Metric size | Maximum material thickness |
|---|---|---|---|---|
| 50351770 | Hole Punch | ISO 16 | 16.2mm | 2mm |
| 50319914 | Hole Punch | ISO 20 | 20.4mm | 2mm |
| 50351788 | Hole Punch | ISO 25 | 25.4mm | 2mm |
| 50351796 | Hole Punch | ISO 32 | 32.5mm | 3.5mm |
| 50351800 | Hole Punch | ISO 40 | 40.5mm | 3.5mm |
| 50351818 | Hole Punch | ISO 50 | 50.8mm | 3.5mm |
| 50351826 | Hole Punch | ISO 63 | 64mm | 3.5mm |
| 50000420 | Draw Stud | - | 9.5mm | - |
| 50040421 | Draw Stud | - | 19mm | - |
| 50349414 | Ratchet | - | - | - |
| 50360183 | Step Bit | - | 9.7mm | - |
Related Products
Accessories
Related categories
Recently Viewed products
Ask a question
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead