Bahco 4552K1 Extractor for seperators View larger

Bahco 4552K1 Extractor for seperators

4552K1

Bahco

7314150225002

Extractor for separator. Operation: The sharp tapered cutting edges of separator No. 4551 are pressed behind the part to be removed when tightening the stud nuts. Use puller No. 4552 to withdraw separator and part from the shaft by tightening the rod nuts.

More details

Shipping Fees

Delivery & Returns Information

Free UK Delivery on orders over £75.00 including VAT

Estimate Shipping fees

$19.97

Price Breaks

QuantityPrice Each
10 $18.97
25 $17.97

More info

Bahco 4552K1 Extractor for seperators

  • Extractor for separator
  • Operation: The sharp tapered cutting edges of separator No. 4551 are pressed behind the part to be removed when tightening the stud nuts
  • Use puller No. 4552 to withdraw separator and part from the shaft by tightening the rod nuts
  • Opening capacity/span depth in mm:
  • 4552-1: 45-140/150
  • 4552-2: 55-200/210
  • 4552-3: 90-260/315
  • 4552/B: Spare body
  • 4552K: Spare tie rod
  • 4532/S: Spare spindle
  • 4532-OAB/S: for 4552-1 (M14x1.5x135, SW 17, 175 g)
  • 4532-CD/S for 4552-2 and 4552-3 (G1/2"x14x210, SW 22, 575 g)
Product
4552-140 Nm2.5 to25 kN4551-A-B1100 g
4552-270 Nm4 to40 kN4551-C2700 g
4552-390 Nm5 to50 kN4551-D5200 g
4552K1    140 g
4552K2    360 g
4552K3    800 g

Ask a question

If your question has not yet been answered below, use the form below to ask something about this product.

Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead

(Will be shown along side your question when it is answered. Optional, if you prefer to remain anonymous please leave blank.)
*(Required to be notified when an answer is available)