HOTweezers HE-410MB 4B Unit and M-10 Power Supply Set - UK Plug (28 AWG - 18 AWG)



  • Thermal wire strippers for 28 AWG - 18 AWG (0.38mm to 1.22mm) wire with M-10 Power Supply set (UK Plug)

More details

Shipping Fees and Delivery Information
Free UK Delivery on orders over £50.00 including VAT

Estimate Shipping fees



More info


HOTweezers are produced in California by the Meisei Corporation. This is their solution to improve the quality and efficiency of wire stripping. 

Wire stripping with HOTweezers is done by the high-strength, high temperature alloy hand held tweezers, which weigh only 57g (just under two ounces). Their lack of weight enables them to be held comfortably in the users users hand, enabling a natural stripping action.

Within the wire stripping head is a heater filament which is completely sealed. The heat that this filament generates is highly targetted, making the stripping of wires quick and effortless. 

The heat efficiency generated by the HOTweezers means that the power supply can be smaller because it consumes less energy.

The power supply includes a switch to turn the unit on and off, as well as 'Hi' and 'Low' jacks, a temperature control switch and unique holder for the hand-held tweezers. 

When the HOTweezers are placed in the holder, a switch is activated to set the temperature control to idle, but when the wire strippers are removed from the holder the control is set back to it's original temperature. 

The supply provides an isolated, low-voltage output for operator safety.

This product is CE marked, meaning it is safe to use in the European Economic Area.  

UK Adaptor included. EU and US plugs also available. 

Technical Details

  • Dimensions - Height 7.6cm x Width 11.4cm x Depth 11.4cm
  • Hole sizes (AWG) - 28, 26, 24, 22, 20, 18
  • ESD safe - No
  • Temperature range - 149°C - 816°C / 300°F to 1,500°F

Related Products


Ask a question

1 Question(s) answered

  • Asked by Phil
    on 9/10/2018  

    Is this capable of stripping Uniflexglas 20 wire? I'm seeking an alternative to the Ideal wire strippers which leave a lot of the Kapton insulation layer behind. Answer:
    The only real way of seeing if the HOTweezer hand unit will strip the wire is by sending us a sample so we can test it for you. We can also look at the mechanical options. We offer a wire analysis to determine the correct tool for the wire that will not leave any insulation behind but still not nick/scrape the wire.

If your question has not yet been answered below, use the form below to ask something about this product.

Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead

(Will be shown along side your question when it is answered. Optional, if you prefer to remain anonymous please leave blank.)
*(Required to be notified when an answer is available)