Greenlee 50766797 ISO 16 - 63 Slug Splitter® Punch Set - Nine Pieces
50766797
- Punch set between ISO 16 - ISO 63 designed for punching stainless steel
- Split slugs fall free when punch is complete, for easy disposal
More info
Features
- Slug Splitter hole punch set between ISO 16 - ISO 63 (16.2mm - 64mm), which can cut through stainless steel (V2A), sheet steel (ST37 low carbon steel), plastic and aluminium up to 3.5mm thickness.
- Can be used with hydraulic hole punch tools.
- Includes punches, draw studs and plastic case.
Pre-drilling
- Where the draw stud is 11.1mm diameter, a pilot hole of 12.7mm must be drilled.
- Where the draw stud is 19mm diameter, a pilot hole of 20.5mm must be drilled.
Set Includes
| Product | ISO size | Metric size | Maximum material thickness |
|---|---|---|---|
| 50069527 | ISO 16 | 16.2mm | 2.5mm |
| 50069543 | ISO 20 | 20.4mm | 2.5mm |
| 50069560 | ISO 25 | 25.4mm | 3.5mm |
| 50069594 | ISO 32 | 32.5mm | 3.5mm |
| 50069616 | ISO 40 | 40.5mm | 3.5mm |
| 50069632 | ISO 50 | 50.8mm | 3.5mm |
| 50069667 | ISO 63 | 64mm | 3.5mm |
| 50294512 (draw stud) | - | 11mm | - |
| 50294520 (draw stud) | - | 19mm | - |
Related Products
Accessories
Related categories
Recently Viewed products
Ask a question
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead