Steinel HG2220E 240v Heat Gun - UK Plug

009793

Steinel

4007841009793

This Steinel HG2220E electronically controlled 240 volt heat gun with UK plug has an infinitely variable temperature setting from 80°C – 630°C, in nine steps by thumbwheel. 

More details

Estimate shipping fees
Free UK Delivery on orders over £50.00 including VAT

Estimate Shipping fees

 

IN STOCK FOR IMMEDIATE DELIVERY

$148.72

Price Breaks

QuantityPrice Each
25 $141.29

More info

This Steinel HG2220E electronically controlled 240 volt heat gun with UK plug has an infinitely variable temperature setting from 80°C – 630°C, in nine steps by thumbwheel.  

Features

  • The appropriate airflow rate can be selected from two stages, 150 l/min and 500 l/min.
  • This heat gun is extremely lightweight at only 610g
  • Has a 2.2kW brushless motor, which is rated for 750 hours of operation.
  • Features an integrated fine dust filter, which protects internal components of the heat gun in dusty environments.
  • Has a thermal cut-out and slender handle with soft inlay for working safety and comfort.

Technical Details

  • Voltage: 240v
  • Wattage: 2.2kW
  • Dimensions: 337mm (length) x 75mm (width) x 89mm (height)
  • Weight: 0.61 kg
  • Cord length: 3 metres
  • Maximum airflow: 500L/min
  • Minimum operating temperature: 80°C
  • Maximum operating temperature: 630°C

Related Products

Accessories

Ask a question

3 Question(s) answered

  • Asked by Steve
    on 31/05/2018  

    Could you please tell me what accessories (nozzles) come with this heat gun, also does it come in its own box. Answer:
    The heat gun comes with a case but accessories are sold separately.
  • Asked by Rossita Atanassova
    on 12/08/2019  

    Could you tell me where I can find Angled Flathead Slit nozzle 20mm for this gun? Answer:
    We don’t offer an 20mm Angled Flat Nozzle for the HG2220 E which is the tool the code number below refers to.We only offer a nozzle of that type to fit the HG2420 E & HG2620 E for the welding of roofing products etc.
  • Asked by Cai Edwards
    on 30/11/2019  

    Would this machine (HG2220 E) be suitable for welding 600g pvc fabric? If so what additional tools would i need? How strong would the weld be ? If you don't think this machine is suitable what would you recommend ? Answer:
    If you are ‘welding’ the sheets of PVC one overlapping the other, then we would suggest that you use the HG2620E. It is a digitally controlled heat gun that is used for the welding of roofing sheets etc.You would also need a 40mm, flat-angled nozzle, (Code: 092016) and a 40mm wide, silicon pressure roller, (Code: 006785).

If your question has not yet been answered below, use the form below to ask something about this product.

Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead

(Will be shown along side your question when it is answered. Optional, if you prefer to remain anonymous please leave blank.)
*(Required to be notified when an answer is available)