View larger
Bahco 1950MZ-3/8 3/8" x 0mm - 29mm Adjustable Crows Foot Spanner
1950MZ-3/8
7314150130207
- 3/8" square drive x 0mm - 29mm adjustable crows foot spanner
- Easy to read, graduated scale in mm and inches
- Made from super-tough alloy steel
- Use with compatible bar handle (not supplied)
- Standards: ISO 1174 and DIN 3120
More info
The jaw opening on this crows foot spanner is adjustable from 0mm to 29mm, perfect for completing most tasks in hand. Use with a torque wrench (not supplied) to get firm leverage on any nut or bolt. Made from heavy-duty, high-performance alloy steel, this small but perfectly formed adjustable crows foot spanner will allow for tightening or loosening of components in the tightest of spaces.
As well as meeting German tool standard DIN 3120, this small, adjustable spanner also conforms to ISO 1174 for manufacture and prescribed use of adjustable wrenches.
Features
- 3/8" square drive x 0mm - 29mm adjustable crows foot spanner
- Meets the stringent standards of ISO 1174 and DIN 3120
- Made from tough alloy steel
- Adjustable maximum opening up to 29 mm
- Easy-to-read laser branded scale in mm and inches
- Chrome plated bright finishing provides high-quality surface
Technical Details
| Product |  |  | Thickness (A) | Total Width (B) | Opens Upto (C) |  |
|---|---|---|---|---|---|---|
| 1950MZ-3/8 | 0mm - 29mm | 3/8" | 14.5 mm | 65 mm | 29 mm | 170 g |
Related Products
Accessories
Related categories
Recently Viewed products
Ask a question
1 Question(s) answered
-
Asked by Muhammad
on 2/05/2019
I assume thickness (A) = 14.5 mm is the maximum thickness of the jaw. Would you be able to confirm the minimum thickness? In my application, I need to grip a component which is designed with 5 mm wide flats. Answer:
The thickness is 0-29 / 0-1.1 / 8" mm
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead