Filters
Loading...
A crimp tool die is used to crimp connectors, such as cable lugs or butt connectors for electrical and installation work.
The connector is placed on the end of the electrical cable and the die is placed in the crimp tool, which is then squeezed (if manual) or compressed (if electrical/hydraulic) onto the connector, so that the die surrounds the connector and crimps it securely on to the cable.
Each crimp die is sized dependent on the gauge of the wire and connector.
16mm² crimp die for use on C-type terminal clamps 16mm² crimp die for use on C-type terminal clamps
25mm² crimp die for use on C-type terminal clamps 25mm² crimp die for use on C-type terminal clamps
35mm² crimp die for use on C-type terminal clamps 35mm² crimp die for use on C-type terminal clamps
50mm² crimp die for use on C-type terminal clamps 50mm² crimp die for use on C-type terminal clamps
0.25mm² - 6mm² crimp die for use on non-insulated receptacles 0.25mm² - 6mm² crimp die for use on non-insulated receptacles
0.5mm² - 2.5mm² crimp die for use on non-insulated receptacles 0.5mm² - 2.5mm² crimp die for use on non-insulated receptacles
0.5mm² - 1mm² crimp die for use on non-insulated receptacles 0.5mm² - 1mm² crimp die for use on non-insulated receptacles
0.5mm² - 2.5mm² crimp die for use on non-insulated receptacles 0.5mm² - 2.5mm² crimp die for use on non-insulated receptacles
0.5mm² - 1.5mm² crimp die for use on non-insulated receptacles 0.5mm² - 1.5mm² crimp die for use on non-insulated receptacles
10 piece crimping die set which ranges between cross-sections 10mm² - 300mm² 10 piece crimping die set which ranges between cross-sections 10mm² - 300mm²
13 piece crimping die set which ranges between cross-sections 6mm² - 300mm 13 piece crimping die set which ranges between cross-sections 6mm² - 300mm
10 piece crimping die set which ranges between cross-sections 6mm² - 150mm² 10 piece crimping die set which ranges between cross-sections 6mm² - 150mm²