The Unilite PS-HDL6R Headtorch has a high level waterproof IPX6 rating, ensuring it can endure harsh working environments.
It has six powerful Samsung SMD LEDs which provide a maximum output of 350 lumens of white light. This headtorch has four output settings, including high, mid, low and flash. These settings can be cycled through by pressing the button located on the top of the headtorch. To access this button you must slide down the anti-dazzle shield.
The operational modes of this headtorch are:
The head of the headtorch can be easily tilted forwards to a limit of 45 degrees so that you can direct the light where it is needed. The anti-dazzle shield can also be pulled forwards to avoid shining the light into anyone’s eyes.
This headtorch comes with the non-slip adjustable headband that can be personalised to your requirements. It also comes with a bracket with an adhesive pad on the back that will allow the user to attach the headtorch to a helmet.
The PS-HDL6R offers two different power options, either via the included 3.7V 1800mAh Li-polymer battery pack, or by using 3xAAA batteries (not included) inserted into the AAA battery case (included).
The battery pack is easily recharged using the USB cable (included) via the micro USB port situated on the side of the battery pack. When charging, a red LED light will be present. This will turn green once the charging has completed. It takes approximately 4 hours to charge the battery fully.
This headtorch offers an LED power indicator located on the side of the headtorch that will show the user how much power the battery has left. The blue light means that the battery has more than 30% power left, the red light means that the battery has between 30-5% power left and the flashing red light means that there is less than 5% power left.
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead