The HDC controller operates with only the HD-Series electric screwdrivers.
It is a single tool controller that offers programmable speed, angle and soft start options.
It features an I/O interface for communication with external devices such as PLC.
Operates with Electric Screwdriver Models: PHD35N, PHD50N, PHD100N & HD100N
|Tool Weight:||5.7 lbs.|
|Tool Length (Imperial):||9 Inches|
|Tool Length (Metric):||228.60 mm|
|Tool Width (Imperial):||4.125 Inches|
|Tool Width (Metric):||104.77 mm|
|Tool Height (Imperial):||5.66 Inches|
|Tool Height (Metric):||143.76 mm|
|Output VDC:||DC35V, 4A|
|Input VAC:||AC120VC ~ 220V, 50–60Hz|
|Product||Tool Weight||Tool Length (Imperial)||Tool Length (Metric)||Tool Width (Imperial)||Tool Width (Metric)||Tool Height (Imperial)||Tool Height (Metric)||Output VDC||Input VAC||Fuse Size|
|145740||4.6 lbs.||8.75 Inches||222.25 mm||3.75 Inches||95.25 mm||5 Inches||127.00 mm||DC40V, 3A||AC120VC ~ 220V, 50–60Hz||AC250V 10A|
|145820||5.7 lbs.||9 Inches||228.60 mm||4.125 Inches||104.77 mm||5.66 Inches||143.76 mm||DC35V, 4A||AC120VC ~ 220V, 50–60Hz|
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead