Mountz 210303 EFCip40 Electric Torque Multiplier View larger

Mountz 210303 EFCip40 Electric Torque Multiplier 250Nm - 1500Nm

210303

Mountz

The easy-to-operate EFCip40 250Nm - 1500Nm electric torque multiplier is designed for precision tightening and loosening of all heavy duty fastening applications. 

More details

Shipping Fees and Delivery Information
Free UK Delivery on orders over £50.00 including VAT

Estimate Shipping fees

$19,094.97

More info

The easy-to-operate EFCip40 250Nm - 1500Nm electric torque multiplier is designed for precision tightening and loosening of all heavy duty fastening applications.

From tightening large industrial bolts used in windmill gearbox assemblies to bolting maintenance applications for oil & gas pipelines and rigs, this Mountz torque multiplier achieves precision torque in a quick, cost-efficient manner.

This electric torque multiplier has an accuracy better than ± 5%.

Features

  • Precision tightening and loosening of all heavy duty fastening connections.
  • This electric torque multiplier shuts-off when pre-set torque is achieved. It is non-impacting and operates at a smooth, continuous rotation.
  • It increases speed and productivity because it is 5-10 times faster than slow ratcheting hydraulic wrenches. This tool is also less expensive than hydraulic wrenches.
  • It is ergonomically safer than the harmful hammering of impact wrenches and eliminates the frequent and costly repairs associated with impact wrenches.
  • Microprocessor controlled. The speed, frequency and torque correspond with a built-in controller (no separate box needed).
  • Features a brushless motor design which provides low maintenance.
  • Has over-heat protection.
  • Universal AC Input (100-253V / 45-66 Hz).
  • The handle can free float or locks in a set position.
  • Protected against dampness and spattered water through its IP54 rated protection.
  • Supplied with a reaction foot.

Product Specifications

Drive Size:1" Sq. Dr.
American:185 - 1106 lbf.ft
S.I.:250 - 1500 N.m
Metric:25.5 - 153 kgf.m
Tool Weight:22 lbs.
Tool Length (Imperial):15 Inches
Tool Length (Metric):381.00 mm
RPM:15
Spline Diameter:54 mm
D2 Size (mm):85
ProductDrive SizeAmericanS.I.MetricTool WeightTool Length (Imperial)Tool Length (Metric)RPMSpline DiameterD2 Size (mm)
2103003/4" Sq. Dr.52 - 295 lbf.ft70 - 400 N.m7.1 - 40.8 kgf.m19.8 lbs.13 Inches330.20 mm7641 mm85
2103013/4" Sq. Dr.59 - 442 lbf.ft80 - 600 N.m8.2 - 61.2 kgf.m19.8 lbs.13 Inches330.20 mm3841 mm85
2103023/4" Sq. Dr.111 - 727 lbf.ft150 - 1000 N.m15.3 - 102 kgf.m19.8 lbs.13 Inches330.20 mm2441 mm85
2103031" Sq. Dr.185 - 1106 lbf.ft250 - 1500 N.m25.5 - 153 kgf.m22 lbs.15 Inches381.00 mm1554 mm85
2103041" Sq. Dr.221 - 1327 lbf.ft300 - 1800 N.m30.6 - 183.6 kgf.m22 lbs.15 Inches381.00 mm1354 mm85
2103051" Sq. Dr.332 - 1843 lbf.ft450 - 2500 N.m45.9 - 255 kgf.m24.2 lbs.15.3 Inches388.62 mm1254 mm98
2103071 1/2" Sq. Dr.443 - 2581 lbf.ft600 - 3500 N.m61.2 - 357 kgf.m29.1 lbs.16 Inches406.40 mm972 mm98
2103081 1/2" Sq. Dr.590 - 3097 lbf.ft800 - 4200 N.m81.6 - 428.4 kgf.m29.1 lbs.16 Inches406.40 mm772 mm123
2103101 1/2" Sq. Dr.738 - 3688 lbf.ft1000 - 5000 N.m102 - 510 kgf.m38.6 lbs.16.9 Inches429.26 mm672 mm123
2103111 1/2" Sq. Dr.959 - 4646 lbf.ft1300 - 6300 N.m132.6 - 642.6 kgf.m40.8 lbs.16.9 Inches429.26 mm472 mm123

Related Products

Download

Ask a question

If your question has not yet been answered below, use the form below to ask something about this product.

Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead

(Will be shown along side your question when it is answered. Optional, if you prefer to remain anonymous please leave blank.)
*(Required to be notified when an answer is available)