Mountz 070800 EZ-TorQ II 10i Torque Analyser 11.3cNm - 113cNm

070800

Mountz

  • This 11.3cNm - 113cNm EZ-TorQ digital torque analyser features a built-in transducer.
  • The easy-to-use torque analyser is ideal for all small hand tools & non-impacting power tools.
  • The small size and portability of the torque tester makes it ideal for checking torque tools on the production floor daily or weekly, to ensure the tools aren't falling out of calibration.

More details

Estimate shipping fees
Free UK Delivery on orders over £50.00 including VAT

Estimate Shipping fees

 

$2,371.36

More info

EZ-TorQ II 10i digital torque analyser features a built-in transducer.

The easy-to-use torque analyser is ideal for all small hand tools & non-impacting power tools.

The small size and portability of the torque tester makes it ideal for checking torque tools on the production floor daily or weekly, to ensure the tools aren't falling out of calibration.

This torque analyser has an accuracy ± 0.5% of reading from 20% to 100% of full scale, and an accuracy ± 1% of reading from 10% to 20% of full scale.

Features

  • This torque analyser is recommended for hand screwdrivers, most wrenches and power tools.
  • Selection of three operation modes: (Track, Peak and First Peak).
  • Features seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm).
  • Features built-in quick test operation.
  • PC Windows based software program: Mountz EZ-TorQ II Interface Program - enables you to conduct quick tool tests, data logging and sensor calibration.
  • Flash memory allows upgrades to be done by the user in the field & internet through the RS-232 port.
  • Has an easy-to-use menu structure.
  • Six-digit display.
  • Ability to download readings to PC via RS-232 or via USB.
  • Real time output via RS-232.
  • High capacity Li-Ion batteries ensure a long service life.
  • The unit will store a total of up to 150 data points.
  • Real time graph of torque vs. time, using associated PC Windows software.
  • Features Go / No-Go LEDs that illuminate when high or low tolerance setting is achieved or out of tolerance.
  • Three low-pass filter settings (130, 150 and 500 Hz).
  • Includes a 1/4" Female/Hex square drive adapter and a spring run down adapter for testing power tools.

Do not use this torque analyser for testing impact or pulse type tools.

Product Specifications

Drive Size:17mm F/Hex
American:1 - 10 lbf.in
S.I.:11.3 - 113 cN.m
Metric:1.2 - 111.5 kgf.cm
Tool Weight:4.5 lbs.
Tool Length (Imperial):7.25 Inches
Tool Length (Metric):184.15 mm
Tool Width (Imperial):4.33 Inches
Tool Width (Metric):109.98 mm
Tool Height (Imperial):2 Inches
Tool Height (Metric):50.80 mm
Cal Cert Options Data Set:Supplied with a Free ISO 17025 Certification of Calibration
ProductDrive SizeAmericanS.I.MetricTool WeightTool Length (Imperial)Tool Length (Metric)Tool Width (Imperial)Tool Width (Metric)Tool Height (Imperial)Tool Height (Metric)
07080017mm F/Hex1 - 10 lbf.in11.3 - 113 cN.m1.2 - 111.5 kgf.cm4.5 lbs.7.25 Inches184.15 mm4.33 Inches109.98 mm2 Inches50.80 mm
07080117mm F/Hex5 - 50 lbf.in56.5 - 565 cN.m5.8 - 57.6 kgf.cm4.5 lbs.7.25 Inches184.15 mm4.33 Inches109.98 mm2 Inches50.80 mm
07080217mm F/Hex10 - 100 lbf.in113 - 1130 cN.m11.5 - 115 kgf.cm4.5 lbs.7.25 Inches184.15 mm4.33 Inches109.98 mm2 Inches50.80 mm
07080317mm F/Hex15 - 150 lbf.in169.5 - 1695 cN.m17.3 - 173 kgf.cm4.5 lbs.7.25 Inches184.15 mm4.33 Inches109.98 mm2 Inches50.80 mm

Related Products

Accessories

Download

Ask a question

If your question has not yet been answered below, use the form below to ask something about this product.

Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead

(Will be shown along side your question when it is answered. Optional, if you prefer to remain anonymous please leave blank.)
*(Required to be notified when an answer is available)