Metcal GT90-HP-T4 GT90 90W Soldering Station with GT-HP–T4UF Hand-piece, GT-HC-T4 Heater, and GT-WS Workstand

GT90-HP-T4

Metcal

  • 90 Watt single port soldering station with hand piece and work stand
  • Features temperature control between 200°C to 450°C (392°F to 842°F)
  • The inductive heating system offers best in class performance and is ideal for use on lower thermal demand applications and small components

More details

Shipping Fees

Delivery & Returns Information

Free UK Delivery on orders over £75.00 including VAT

Estimate Shipping fees

IN STOCK FOR IMMEDIATE DELIVERY

$279.92

More info

Features

  • 90 Watt ESD safe soldering station with adjustable temperature control between 200°C to 450°C (392°F to 842°F).
  • Comes with GT-HP–T4UF hand-piece, GT-HC-T4 heater, and GT-WS workstand.
  • This soldering station has best in class, time to temperature as well as improved temperature stability and thermal recovery, designed to improve the solder joint and reduce scrap yields.
  • Can be used with a wide variety of tips (see table below).
  • Features programmable password lock-out and temperature range limits, making it ideal for use as part of a product line used by multiple operators, with stand-by and sleep operations for increased tip life.
  • Easily updateable via USB port for firmware updates.
  • Ideal for use on applications such as -
    • Medium & light load industrial electronics
    • Consumer electronics
    • Mobile devices
    • White goods

Technical Details

Soldering temperature range200°C - 450°C  (392°F - 842°F)
Input Line Voltage100 - 240 VAC, grounded circuit, 50/60 Hz
Input frequency50Hz / 60Hz
Output Power90 Watts (maximum)
Heating MethodInduction, SmartHeat
Dimensions (Width x Depth x Height)11cm x 12.5cm x 16cm (4.3" x 4.9" x 6.1")
Weight1.68 kg (3.70 lbs)
Standby timer10 seconds - 480 seconds
Sleep timer1 minute - 100 minutes
Free range tip temperature modeYes
Tip temperature presetsThree
Tip-to-Ground Potential / Resistance< 2 mV / < 2 Ω
Surface Resistivity105 - 109 Ohm, 
ESD SafeYes
Hand-piece connector8-pin circular DIN
Tip Temperature AccuracyMeets or exceeds IPC-J-STD
Power Cord Length1.5 metres (5 ft)

Accessories

Part No.Tip TypeTip Width (mm)
GT4-CH0010PChisel, Power1.0
GT4-CH0010SChisel1.0
GT4-CH0014PChisel, Power1.4
GT4-CH0014SChisel1.4
GT4-CH0018PChisel, Power1.8
GT4-CH0018SChisel1.8
GT4-CH0025PChisel, Power2.5
GT4-CH0025SChisel2.5
GT4-CH0032PChisel, Power3.2
GT4-CH0032SChisel3.2
GT4-CH0040PChisel, Power4.0
GT4-CH0040SChisel4.0
GT4-CN0002RConical0.2
GT4-CN0004RConical0.4
GT4-CN0005AConical, Access0.5
GT4-CN0005PConical, Power0.5
GT4-CN0005SConical0.5
GT4-CN0010AConical, Access1.0
GT4-CN0010PConical, Power1.0
GT4-CN1502AConical, Sharp0.2
GT4-CN1505AConical, Sharp0.5
GT4-CN1505RConical, Bent, Reach0.5
GT4-CN1608RConical, Bent, Access0.8
GT4-CN2213RConical, Bent, Reach1.3
GT4-HF3025VHoof, Bent2.5
GT4-HF6010SHoof1.0
GT4-HF6010VHoof1.0
GT4-HF6015SHoof1.5
GT4-HF6015VHoof1.5
GT4-HF6020SHoof2.0
GT4-HF6020VHoof2.0
GT4-HF6030SHoof3.0
GT4-HF6030VHoof3.0
GT4-KN0025PKnife, Power2.5
GT4-KN0025SKnife2.5
GT4-KN0040PKnife, Power4.0
GT4-KN0040SKnife4.0

Related Products

Accessories

Ask a question

If your question has not yet been answered below, use the form below to ask something about this product.

Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead

(Will be shown along side your question when it is answered. Optional, if you prefer to remain anonymous please leave blank.)
*(Required to be notified when an answer is available)