A slogging ring spanner is specifically designed for use with a hammer. When you need a fastening to be tightened or have a nut or bolt that is refusing to move, reaching for a combination of hammer and spanner is common. Problem is, you can damage a traditional ring spanner as well as the nut or bolt.
This is why Bahco have developed this 2 1/4” slogging ring spanner. It allows you to get the job done without damaging or shearing nuts and bolts, and saving your spanners too.
As you would expect, Bahco brings to the market a high-quality slogging ring spanner. Its 12 point profile ring ensures a snug and precise fit onto the nut or bolt. Reducing slippage means you get the job done faster but without the corners of the bolts or nut head from being damaging or eroded.
It has a short but strong handle, with a striking area for hammer blows that will lead to the effective assembly and disassembly of nuts and bolts.
Available in a range of imperial sizes, it also conforms to the stringent standards of DIN 7444. A worthy investment for your tool kit.
|7444SG-Z-1.1/16||1 1/16 in||180 mm||16 mm||46 mm||350 g|
|7444SG-Z-1.1/8||1 1/8 in||180 mm||16 mm||46 mm||350 g|
|7444SG-Z-1.3/16||1 3/16 in||190 mm||17 mm||52 mm||400 g|
|7444SG-Z-1.1/4||1 1/4 in||190 mm||17 mm||52 mm||450 g|
|7444SG-Z-1.5/16||1 5/16 in||190 mm||17 mm||52 mm||450 g|
|7444SG-Z-1.3/8||1 3/8 in||205 mm||18 mm||58 mm||750 g|
|7444SG-Z-1.7/16||1 7/16 in||205 mm||18 mm||58 mm||750 g|
|7444SG-Z-1.1/2||1 1/2 in||205 mm||18 mm||58 mm||750 g|
|7444SG-Z-1.5/8||1 5/8 in||230 mm||20 mm||66 mm||850 g|
|7444SG-Z-1.11/16||1 11/16 in||230 mm||20 mm||66 mm||850 g|
|7444SG-Z-1.3/4||1 3/4 in||240 mm||22 mm||74 mm||1050 g|
|7444SG-Z-1.13/16||1 13/16 in||240 mm||22 mm||74 mm||1050 g|
|7444SG-Z-1.7/8||1 7/8 in||240 mm||22 mm||74 mm||1050 g|
|7444SG-Z-2||2 in||255 mm||24 mm||80 mm||1250 g|
|7444SG-Z-2.1/16||2 1/16 in||255 mm||24 mm||80 mm||1250 g|
|7444SG-Z-2.1/8||2 1/8 in||270 mm||25 mm||86 mm||1550 g|
|7444SG-Z-2.3/16||2 3/16 in||270 mm||25 mm||86 mm||1550 g|
|7444SG-Z-2.1/4||2 1/4 in||270 mm||25 mm||86 mm||1550 g|
|7444SG-Z-2.3/8||2 3/8 in||280 mm||26 mm||93 mm||1650 g|
|7444SG-Z-2.9/16||2 9/16 in||300 mm||30 mm||102 mm||2300 g|
|7444SG-Z-2.5/8||2 5/8 in||300 mm||30 mm||102 mm||2300 g|
|7444SG-Z-2.3/4||2 3/4 in||330 mm||33 mm||110 mm||2600 g|
|7444SG-Z-3||3 in||330 mm||33 mm||110 mm||3350 g|
|7444SG-Z-3.1/8||3 1/8 in||360 mm||36 mm||126 mm||3800 g|
|7444SG-Z-3.3/8||3 3/8 in||360 mm||36 mm||126 mm||4200 g|
|7444SG-Z-3.1/2||3 1/2 in||390 mm||40 mm||142 mm||5700 g|
|7444SG-Z-3.3/4||3 3/4 in||390 mm||40 mm||142 mm||5700 g|
|7444SG-Z-3.7/8||3 7/8 in||420 mm||45 mm||155 mm||6700 g|
|7444SG-Z-4||4 in||420 mm||45 mm||155 mm||6700 g|
|7444SG-Z-4.1/8||4 1/8 in||420 mm||45 mm||155 mm||6700 g|
|7444SG-Z-4.1/2||4 1/2 in||450 mm||48 mm||170 mm||8500 g|
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead