It may look compact in design but don’t underestimate the power and impact of this 90mm slogging ring spanner from Bahco.
When a fastening is over-tightened or when you need to give it that all important extra nudge into position, you’ll probably reach for your hammer. Whilst this is a great idea, it may be that you damage your spanner and/or the nut or bolt too. This slogging ring spanner has been designed specifically for use with a hammer meaning you won’t damage your tools or the all-important fastening.
Short in length, it is ideal for when working in confined or awkward spaces. As you would expect from tool specialist Bahco, the design and quality of the 90mm slogging ring spanner is second to none.
Made from tough steel, it has a grey finish that further protects it as well as offering a non-slip surface at the stubby end as a strike point for a hammering action.
The 12 point profile ring also provides exceptional grip without damaging the nut or bolt, especially important when extra force and drive is needed.
As well as the bi-hexagonal drive, the spanner also conforms to DIN 7444, an important accolade for any tool. When it comes to populating your kit with quality tools, the slogging ring spanner from Bahco is a must buy.
|7444SG-M-24||24 mm||165 mm||15 mm||43 mm||235 g|
|7444SG-M-27||27 mm||180 mm||16 mm||46 mm||295 g|
|7444SG-M-30||30 mm||190 mm||17 mm||52 mm||400 g|
|7444SG-M-32||32 mm||190 mm||17 mm||52 mm||400 g|
|7444SG-M-34||34 mm||205 mm||18 mm||57 mm||400 g|
|7444SG-M-36||36 mm||205 mm||18 mm||58 mm||540 g|
|7444SG-M-38||38 mm||205 mm||18 mm||58 mm||540 g|
|7444SG-M-41||41 mm||230 mm||20 mm||66 mm||700 g|
|7444SG-M-42||42 mm||230 mm||20 mm||66 mm||700 g|
|7444SG-M-46||46 mm||240 mm||22 mm||74 mm||970 g|
|7444SG-M-50||50 mm||255 mm||24 mm||80 mm||1130 g|
|7444SG-M-55||55 mm||270 mm||25 mm||86 mm||1345 g|
|7444SG-M-60||60 mm||280 mm||26 mm||93 mm||1650 g|
|7444SG-M-65||65 mm||300 mm||30 mm||102 mm||2000 g|
|7444SG-M-70||70 mm||330 mm||33 mm||110 mm||2600 g|
|7444SG-M-75||75 mm||330 mm||33 mm||110 mm||2600 g|
|7444SG-M-80||80 mm||360 mm||36 mm||126 mm||3500 g|
|7444SG-M-85||85 mm||360 mm||36 mm||126 mm||3500 g|
|7444SG-M-90||90 mm||390 mm||40 mm||142 mm||5000 g|
|7444SG-M-95||95 mm||390 mm||40 mm||142 mm||5000 g|
|7444SG-M-100||100 mm||420 mm||45 mm||155 mm||6500 g|
|7444SG-M-105||105 mm||420 mm||45 mm||155 mm||6500 g|
|7444SG-M-110||110 mm||450 mm||48 mm||170 mm||7800 g|
|7444SG-M-115||115 mm||450 mm||48 mm||170 mm||7800 g|
|7444SG-M-120||120 mm||480 mm||54 mm||182 mm||9400 g|
|7444SG-M-125||125 mm||480 mm||54 mm||182 mm||8500 g|
|7444SG-M-130||130 mm||520 mm||58 mm||202 mm||13000 g|
|7444SG-M-135||135 mm||520 mm||58 mm||202 mm||11900 g|
|7444SG-M-140||140 mm||520 mm||58 mm||202 mm||12500 g|
|7444SG-M-145||145 mm||580 mm||64 mm||228 mm||18500 g|
|7444SG-M-150||150 mm||580 mm||64 mm||228 mm||18750 g|
|7444SG-M-155||155 mm||580 mm||64 mm||228 mm||18550 g|
|7444SG-M-160||160 mm||580 mm||64 mm||228 mm||18000 g|
|7444SG-M-165||165 mm||650 mm||70 mm||565 mm||25000 g|
|7444SG-M-170||170 mm||650 mm||70 mm||565 mm||25000 g|
|7444SG-M-175||175 mm||650 mm||70 mm||565 mm||25000 g|
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead