Anything with a spline drive has been adapted to so that assembling or disassembling high tensile strength fastenings is done by moving the force away from the corners. As well as promoting longer life in nuts and bolts, when corners are worn or rounded, this 3/8" x 7/16" offset spline drive ring spanner will deliver the grip and drive needed.
Aside from being a welcome additional tool to your kit, this Stahlwille spline ring spanner has two heads offset at a working angle of 15°, giving you yet more grip without damaging the nut or bolt.
It benefits from many years of innovation that Stahlwille is known for, including being made from HPQ® high performance steel.
|41160709||7/32" x 9/32"||7 x 9||185mm||28g||9.4mm||11.5mm||5.3mm||5.8mm|
|41160810||1/4" x 5/16"||8 x 10||205mm||33g||10.4mm||12.4mm||5.6mm||6mm|
|41161214||3/8" x 7/16"||12 x 14||250mm||79g||14.9mm||17mm||8mm||8.7mm|
|41161618||1/2" x 9/16"||16 x 18||290mm||161g||19mm||21mm||9.5mm||9.5mm|
|41161820||9/16" x 5/8"||18 x 20||315mm||205g||21mm||23mm||10mm||11mm|
|41162224||11/16" x 3/4"||22 x 24||365mm||310g||25mm||27.5mm||11mm||12mm|
|41162630||13/16" x 15/16"||26 x 30||410mm||496g||29.5mm||34mm||13mm||14.3mm|
|41162832||7/8" x 1"||28 x 32||430mm||582g||32mm||36.5mm||13.5mm||15mm|
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead