There are times when the simplest of designs deliver exactly what you need which is why the Bahco 3/8" & 7/16" offset double-ended ring wrench should be in your toolbox.
Bahco has long been known for producing quality tools that withstand heavy use but are also ideal for the competent DIYer and mechanic. With its offset design, this double-ended ring wrench will be used time and again to loosen and tighten nuts and bolts with the drive you need but without over tightening or cross-threading.
The swan neck, 15° angle of each ring and slimline features of the wrench means it sits well in your hand whilst also allowing for improved purchase on the nut or bolt. Complete with Bahco’s 12 point dynamic-drive profile, damage to nut heads and corners of bolts is minimised too.
Made from high quality alloy steel, this double-ended ring wrench will be an integral part of your toolbox for years to come. A longline wrench at 193mm, the ring wrench is available in a range of sizes.
|1300Z-1/4-5/16||1/4" x 5/16"||156 mm||6 mm||6.9 mm||10.1 mm||12.2 mm||35 g|
|1300Z-3/8-7/16||3/8" x 7/16"||193 mm||7.7 mm||8.5 mm||14.4 mm||16.5 mm||50 g|
|1300Z-1/2-9/16||1/2" x 9/16"||220 mm||9 mm||9.4 mm||18.7 mm||20.8 mm||105 g|
|1300Z-19/32-11/16||19/32" x 11/16"||258 mm||10.8 mm||11.6 mm||23 mm||25.1 mm||171 g|
|1300Z-5/8-3/4||5/8" x 3/4"||268 mm||10.8 mm||12.3 mm||23 mm||27.3 mm||210 g|
|1300Z-25/32-13/16||25/32" x 13/16"||300 mm||12.3 mm||13.1 mm||27.3 mm||29.4 mm||300 g|
|1300Z-7/8-15/16||7/8" x 15/16"||334 mm||13.8 mm||14.6 mm||31.6 mm||33.8 mm||410 g|
|1300Z-15/16-1||15/16" x 1"||352 mm||14.6 mm||15.3 mm||33.8 mm||35.9 mm||460 g|
|1300Z-1-1.1/8||1" x 1.1/8"||380 mm||19 mm||21 mm||35 mm||37 mm||680 g|
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead