8728 0000 6
0.08mm² to 1.3mm² indent crimping tool made by Rennsteig and approved for use on Airbus.
An ideal replacement for both the Astro M22520/7-01 and the DMC M22520/7-01 MH860 crimp tools.
This 4/8 indent crimping tool by Rennsteig is designed for crimping male and female contacts.
Indenter geometry is in accordance with M22520/7-01.
The relevant crimp depth can be set by an eight position selector which is readable on both sides of the tool, with selector settings inaccordance to MIL.
Go-Nogo gauge for accurate calibration according to MIL22520/3-03 and MIL22520/3-01 standard available.
Forced locking system and synchronous drive of indenters for highly reliable crimp connections.
Optimized opening width, ergonomic design and reduced handforce.
Approval for aviation after successful qualification through Airbus SAS.
|Part Number||Finish||Capacity||Max. Contact Diameter (mm)||Weight (g)||CORR.|
|8728 0000 6||Tool without locator||0.08-1.3||28-16||4||300||M22520/7-01|
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead