EKM60UNVCFB
Availability date:
Part No. | Description |
---|---|
RALB1EU | Bosch battery 18 V / 2.0 Ah, Li-Ion |
LGLB1EU | Bosch quick-charger for 18 V Li-Ion batteries |
UA22 | Adapter for crimping dies of Series 22 |
KKMUNVNG | Hard plastic carrying case |
Part No. | Description |
---|---|
UA5 | Adapter for crimping dies of Series 5 |
UA18 | Adapter for crimping dies of Series 18 |
UA22 | Adapter for crimping dies of Series 22 |
UCACSR | Cutting die for Al/Cu conductors to maximum 40mm diameter |
UC26 | Cutting die up to maximum 26mm diameter for cutting stranded Cu and Al conductors without armouring |
UC40 | Cutting die to maximum 40mm diameter |
UCM5 | Cutting die for threaded rods M5 metric |
UCM6 | Cutting die for threaded rods M6 metric |
UCM8 | Cutting die for threaded rods M8 metric |
UCM10 | Cutting die for threaded rods M10 metric |
UCM12 | Cutting die for threaded rods M12 metric |
UCUNC14 | Cutting insert for threaded rods 1/4" |
UCUNC38 | Cutting die for threaded rods 3/8" |
UCUNC12 | Cutting die for threaded rods 1/2" |
UCD3215 | Cutting die for profile conductors 32 x 15 x 9 |
UCD3575 | Cutting die for profile conductors 35 x 7.5 |
UCF | Cutting die for laminated Cu bus bars, maximum width 37.5mm |
UA6P | Hole punch adapter to 64mm, 92 x 92mm and 46 x 92mm diameter |
UPD6 | Die for punching DIN rails 35x15; 32x15x9; 35x7.5 |
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead