EK120UCFB
Availability date:
Delivery & Returns Information
Maximum crimping force | 120kN |
Opening width | 20 mm |
Crimping range | 16mm² - 400mm² |
Crimping cycle | 7 seconds to 8 seconds (depending on crimping cross-section) |
Battery voltage | 18 V |
Battery capacity | 5.0 Ah, Li-Ion |
Battery charging time | 45 minutes |
Weight including battery | 6.2kg |
Ambient temperature | -10°C to +40°C |
suitable for | Connecting material | Crimping range mm² | Crimping profile |
---|---|---|---|
Copper tubular cable lugs and connectors, standard design, tubular cable lugs for switch cabinet connections | 16 - 400 | ||
Butt connectors, standard type | 16 - 185 | ||
Insulated cable lugs and connectors, insulated pin terminals | 10 - 150 | ||
Tubular cable lugs and connectors for fine stranded conductors | 10 - 150 |
suitable for | Connecting material | Crimping range mm² | Crimping profile |
---|---|---|---|
Tubular cable lugs and connectors – VA | 70 - 95 | ||
Tubular cable lugs and connectors – VA | 10 - 50 | ||
Tubular cable lugs and connectors - Ni | 10 - 50 | ||
Tubular cable lugs and connectors - Ni | 70 - 95 |
suitable for | Connecting material | Crimping range mm² | Crimping profile |
---|---|---|---|
Compression cable lugs (DIN 46235) and connectors (DIN 46237, part 1) according to DIN - Cu | 10 - 300 | ||
Compression joints DIN 46267, part 1 | 10 - 150 | ||
Double compression cable lugs | 2 x 50 - 2 x 120 |
suitable for | Connecting material | Crimping range mm² | Crimping profile |
---|---|---|---|
Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN - Cu | 10 - 150 | ||
Insulated solderless terminals and pin terminals | 10 - 95 |
suitable for | Connecting material | Crimping range mm² | Crimping profile |
---|---|---|---|
Pre-rounding dies for sector-shaped Al and Cu conductors, 3-core and 4-core sector-shaped conductors | 10 sm - 300 se / 300 sm |
suitable for | Connecting material | Crimping range mm² | Crimping profile |
---|---|---|---|
Compression cable lugs and connectors according to DIN - Al | 10 - 300 rm/sm, 16 - 400 re/se | ||
Compression joints for full tension connections of Aldrey-conductors according to DIN EN 50182 and Al-conductors DIN EN 50182, 120 – 185 mm² | 25 - 185 | ||
Compression joints according to DIN 48085, part 3 for Al-/St-cable according to DIN EN 50182, aluminium crimping | 25/4 - 120/20 | ||
Compression joints according to DIN 48085, part 3 for Al-/St-cable according to DIN EN 50182, steel crimping | 25/4 - 120/20 |
suitable for | Connecting material | Crimping range mm² | Crimping profile |
---|---|---|---|
Compression cable lugs and connectors - Al/Cu | 10 - 300 rm/sm, 16 - 400 re/se |
suitable for | Connecting material | Crimping range mm² | Crimping profile |
---|---|---|---|
C-type terminal clamps | 10 - 70 | ||
H-type terminal clamps | 70 - 120 |
suitable for | Connecting material | Crimping range mm² | Crimping profile |
---|---|---|---|
Cable end sleeves | 25 - 240 |
Part No. | Description |
---|---|
RALB2EU | Bosch battery 18 V / 5.0 Ah, Li-Ion |
LGLB1EU | Bosch quick-charger for 18 V Li-Ion batteries |
KK120NG | Hard plastic carrying case |
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead