Daylight D35108 Slimline 3 Table Lamp

D35108

Daylight Company

5022737351083

  • The third generation Daylight Slimline Table Lamp comes with superb additional features, taking the original Slimline to another level.
  • This table lamp comes with a 2 year guarantee.

More details

Shipping Fees

Delivery & Returns Information

Free UK Delivery on orders over £75.00 including VAT

Estimate Shipping fees

10+ IN STOCK FOR IMMEDIATE DELIVERY

$108.38

More info

The Daylight Slimline 3 Table Lamp emits a brighter light with better diffusion than the previous Slimline models.

A four-step dimmer allows brightness control and the clamp has been re-designed to be even less obtrusive. It comes in brushed steel for a sleek look and feel, while the round switch adds neatness to the finishing touch.

Features

  • Aluminium shade with full length diffuser and a maximum reach of 73 cm (29″).
  • Better spread of light and diffusion.
  • Four brightness levels - 3,000, 2,000, 1,500 and 750 Lux.
  • Flexible joints for perfect positioning.
  • Two years guarantee.

Technical Details

Light sourceLED
Lumens1,065
Lux at 30cm3,000
Colour temperature6,000K
CRI (Colour Rendering Index)80+
Weight0.9kg
Energy consumption13W
Cable length2.4 metres
Height65cm (25.6")
Width76cm (30")
Depth2cm (0.8")
ColourBrushed steel

Related Products

Accessories

Ask a question

15 Question(s) answered

  • Asked by Margaret
    on 20/02/2019  

    What is the height of the Slimline 3 above the table? Answer:
    The height of the lamp above the table, before the flexible arm, is 19.5cm.
  • Asked by Tracy
    on 24/07/2019  

    How long is the light across the table please? Answer:
    The Lux at 30cm (12") in steps 1-2-3-4 is: 3,000-2,000-1,500,750. The length of the arm that houses the LEDs is 48cm (19").
  • Asked by Nia
    on 17/08/2019  

    Can the light shade rotate 360 degrees and do they contain 80 Led lights? Answer:
    The answer is yes to both queries, I hope this helps.
  • Asked by Dan
    on 7/10/2019  

    Does this lamp come with any CE or BS Markings? Answer:
    This lamp does not have any of these markings but it does have a declaration of conformity.
  • Asked by Jane
    on 19/11/2019  

    Is this a clip on lamp or has it got a base? Answer:
    The D35108 comes with a clamp, however a base is available to purchase separately through part number D52107.
  • Asked by Steve
    on 4/06/2020  

    Can the lamp hang down from the clamp? Answer:
    Unfortunately it isn't possible to hang the lamp upside-down from the clamp.
  • Asked by Vivienne
    on 22/06/2020  

    Does the plug come with a UK fitting? Answer:
    All our lamps come with a UK plug unless stated otherwise.
  • Asked by Lisa
    on 11/07/2020  

    Do you sell replacements clamps? Answer:
    Yes, the part number for the clamp is SP35108A.
  • Asked by Karen
    on 4/08/2020  

    How deep/wide will the clamp open ? Answer:
    The clamp opens to a maximum of 9cm.
  • Asked by Karen
    on 19/08/2020  

    What is diameter of lamp, the end that goes into clamp, as I would like it to fit into hole in desk ? Answer:
    The diameter of this part is 20mm.
  • Asked by Kerri
    on 20/08/2020  

    Can I buy a replacement bulb? Answer:
    This lamp has built in LEDs, so we there is no bulb to replace. The LEDs last approximately 50,000 hours and the lamp also comes with a two year guarantee.
  • Asked by Karen
    on 22/08/2020  

    Where does the power supply cord fit? Answer:
    The power cord attaches behind the switch, just above the clamp.
  • Asked by Judy
    on 19/01/2021  

    Can you adjust the angle of the lamp. Eg flexible arm Answer:
    Yes, this lamp has a flexible arm so the user can easily adjust the angle of the lamp to ensure the light is directed where it is needed.
  • Asked by Carol
    on 22/06/2022  

    Can you buy a replacement arm? Answer:
    Unfortunately, we don’t offer a replacement arm for this lamp.
  • Asked by Nicola
    on 25/10/2022  

    Can you put it into a table that has a lamp hole by removing the clamp? It would be used on a nail desk? Answer:
    We recommend using the clamp however we do sell a separate base. You could put it through a hole in a desk, however you would need the clamp to secure it because the lamp is not freestanding.

If your question has not yet been answered below, use the form below to ask something about this product.

Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead

(Will be shown along side your question when it is answered. Optional, if you prefer to remain anonymous please leave blank.)
*(Required to be notified when an answer is available)