Ask a question
1 Question(s) answered
- Asked by Richard
on 5/06/2023
Hi This may be a stupid question but do you know if these dies are compatible with the Milwaukee electric crimping tool, and do you have any other specs for the die as to what you mean by its suitable for standard cable lug, I have a milwaukee 25mm die of which I crimped a 25mm cable lug but it did not securely crimp to cable or is there a standard Klauke cable lug that is required for this die? Answer:
All K22 series dies from Klauke will fit the M18 Milwaukee crimp tool, however it is not recommended.You may find the M18 isn’t creating the correct force as this tool isn’t designed to achieve a force greater than 53kN, whereas the Klauke alternative would be running at 60kN of pressure. Dependent of the wall thickness and material of the lug this could be the issue you are seeing.The Klauke option would be a EKM6022, which is designed to be used with the K22 series dies. The dies vary dependent on the application, spec you are working to and finally the crimping material.
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead