EK60UNVCFM
Availability date:
Delivery & Returns Information
Maximum crimping force | 60kN |
Opening width | 42mm |
Crimping range | 6mm² - 300mm² |
Crimping cycle | 7 seconds to 9 seconds (depending on crimping cross-section) |
Maximum cutting range | 40mm diameter |
Punching capacity | Up to 64mm diameter for round; Up to 92mm x 92mm for square |
Battery voltage | 18 V |
Battery capacity | 4.0 Ah, Li-Ion |
Battery charging time | 36 minutes |
Weight | 4.8kg |
Ambient temperature | -10°C to +40°C |
Part No. | Description |
---|---|
RAL40 | 18 V / 4.0 Ah, Li-Ion Makita battery |
LGL1 | Makita quick-charger for 18 V Li-Ion batteries |
UA22 | Adapter for crimping dies of Series 22 |
KK120UNVNG | Hard plastic carrying case |
Part No. | Description |
---|---|
UA5 | Adapter for crimping dies of Series 5 |
UA18 | Adapter for crimping dies of Series 18 |
UA22 | Adapter for crimping dies of Series 22 |
UCACSR | Cutting die for aluminium/copper conductors to maximum 40mm diameter |
UC26 | Cutting die up to maximum 26mm diameter for cutting stranded copper and aluminium conductors without armouring |
UC40 | Cutting die to maximum 40mm diameter |
UCM5 | Cutting die for threaded rods M5 metric |
UCM6 | Cutting die for threaded rods M6 metric |
UCM8 | Cutting die for threaded rods M8 metric |
UCM10 | Cutting die for threaded rods M10 metric |
UCM12 | Cutting die for threaded rods M12 metric |
UCUNC14 | Cutting insert for threaded rods 1/4" |
UCUNC38 | Cutting die for threaded rods 3/8" |
UCUNC12 | Cutting die for threaded rods 1/2" |
UCD3215 | Cutting die for profile conductors 32mm x 15mm x 9mm |
UCD3575 | Cutting die for profile conductors 35mm x 7.5mm |
UA6P | Hole punch adapter to 64mm, 92mm x 92mm and 46mm x 92mm diameter |
UPD6 | Die for punching DIN rails 35mm x 15mm; 32mm x 15mm x 9mm; 35mm x 7.5mm |
1 Question(s) answered
If your question has not yet been answered below, use the form below to ask something about this product.
Please note only use this form to ask a specific question about this product such as techinal spec. If you wish to make a general enquiry please use our Contact Us form instead